DMR’s

[Raider212 2]

Hi all,

I’m hoping to run an SR-25 under the classification of a DMR but I saw in the rules that DMRs must be incapable of shooting full auto and mine does not have that set up. Is that still the case and if so how is that done (I’m a pretty low level Airsoft tech). Thanks in advance!

[Bacon_BE73 0]

you can look on you tube and see how to shave down the selector plate 

[Dep 15]

You could also put set screw to prevent the selecter switch from going to full auto

[TheJP 3,301]

Hi all,

I’m hoping to run an SR-25 under the classification of a DMR but I saw in the rules that DMRs must be incapable of shooting full auto and mine does not have that set up. Is that still the case and if so how is that done (I’m a pretty low level Airsoft tech). Thanks in advance!

 

Can glue anything to block the selector switch.

[Raider212 2]

Thank you everyone for all the responses! Y’all have been a huge help!

[G_Buckwheat 2]

I may be a couple weeks late to this, but I took my M16a3 and epoxied a piece of steel in a hole I drilled into the lower receiver that prevents full auto capabilities.