Jump to content
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook. ×
American MilSim
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook.
Busyseeker

Technicians on Site

Recommended Posts

I'm wondering if there will be any Technicians at BH this year who are capable of looking at tunine up or fixing my ICS L85. It's currently having issues feeding consistently, as well as some trigger response issues which may be the connectors themselves. I'm also looking at the possibility of improving it's FPS to be more consistent. Any price quotes would be awesome.

 

I'd try to take it to someone in my home town or locally but I'm in El Paso, and my guns are at home state Arkansas.

Share this post


Link to post
Share on other sites

I'm wondering if there will be any Technicians at BH this year who are capable of looking at tunine up or fixing my ICS L85. It's currently having issues feeding consistently, as well as some trigger response issues which may be the connectors themselves. I'm also looking at the possibility of improving it's FPS to be more consistent. Any price quotes would be awesome.

 

I'd try to take it to someone in my home town or locally but I'm in El Paso, and my guns are at home state Arkansas.

Yes xtreme airsoft will be there!!

Share this post


Link to post
Share on other sites

It's a dumb question but I have to ask. Can they diagnose and repair an ICS L85? and do you know if any possible price quotes?

Share this post


Link to post
Share on other sites

Busy, have you linked up with the airsoft group in El Paso? The facebook group is called "EPAG El Paso Milsim Enthusiasts", and there are a couple techs in there who might be able to give you a hand if you post up.

Share this post


Link to post
Share on other sites

Thanks for the advice, I've asked around before but no one around here knows how to work on anything but m4 style platforms. I'll have to check again.

Share this post


Link to post
Share on other sites

Will Polarstar be there by chance...? I need some serious tuning done, my gun is way out of wack. 

Share this post


Link to post
Share on other sites

@busyseeker thanks for reaching out to us directly! I have not been able to check the forum since I left for OP 34 so sorry for late reply!

 

We will have a tech out at Broken Home 6 as always. 

Share this post


Link to post
Share on other sites

@XAAdan I appreciate the quick and professional replies. You guys are better at replying then KWA who never return any of my contact attempts.

Share this post


Link to post
Share on other sites

@yankee-dta   I have sent several e-mails repeatedly to their customer service department in hopes of finding out when and if they ever intended to restock or get new kwa upper receivers. I have never gotten a return on any of those e-mails.

 

However I will say that when I purchased my KWA-SR10 back for Broken Home 3 they were very helpful. I called their customer service number after receiving it from a seller on ebay in hopes that they could verify the SR10 was authentic and had been legally sold ( its ebay, you never know what will come from where or if your getting cheated ) they took the serial number, confirmed it was indeed legit and that it had a warranty on it at the time.

 

When I had tried contacting them through e-mail it was when I wasnt able to call them ( month long FTX ) due to the cell phone service in the area being only good enough to send messages and even then it was spotty at best. I should have been more clear in what I had meant when I said that they never returned any of my contact attempts, I meant that I have never received any return on any web based contact attempts ( e-mail ). After I returned from the field the kwa upper took a back seat to some other things that were going on.

Share this post


Link to post
Share on other sites

×
×
  • Create New...