Classic army Stoner LMG

[Texas_operators 16]

so i recently picked up the Stoner LMG,And come to my suprise is that it does not want to feed.The hop up chamber is completely aligned and there is no blocking issues.Im scratching my head thinking why this gun isnt feeding.Any ideas why?

 

 

 

Godspeed

  -Dylan Thomas

[Guest Specs]

Sounds like mag issues, or it's possible the lips of your bucking might be folded or damaged.

[TheJP 3,301]

so i recently picked up the Stoner LMG,And come to my suprise is that it does not want to feed.The hop up chamber is completely aligned and there is no blocking issues.Im scratching my head thinking why this gun isnt feeding.Any ideas why?

 

 

 

Godspeed

  -Dylan Thomas

 

Dumb question but w/ the mag out of the AEG can you have it feed freely?

[Texas_operators 16]

Dumb question but w/ the mag out of the AEG can you have it feed freely?

I can put a single BB in the hop up cahamber and it will shoot that, but ill try it with the mag out

[Druid 15]

I own a CA Stoner and it can be several things...

 

1)Is the mag feeding OUT of your gun? If the mag is not feeding properly itself then it is the mag.

 

2)One thing you really have to check with these CA Stoner hop-ups is if they are ACTUALLY lined up. The hop up unit has a ridge on it and sets in a groove. This groove lines up the hop-up unit properly with the mag well. If the ridge is not resting in that groove, it can look like it's lined up when it's not.

 

3)if you have taken out the barrel assembly you could have possible lost the brass spring stop that keeps the quick detach barrel spring from going inside the hop-up unit. If this has been lost, the spring can travel too far into the hop up unit and the barrel could be putting tension on the bucking, putting things all out of wack.

 

My CA Stoner: