Jump to content
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook. ×
American MilSim
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook.
Sign in to follow this  
airsoftmachine

rain + aegs

Recommended Posts

You'll be fine.  There's really nothing to hurt.  Make sure you give it a good wipe down when you get home after the game and punch the bore a few times with a dry patch. 

Share this post


Link to post
Share on other sites
Guest Specs

Like Downs said. Just open it up and dry it out a bit once you get home. There are videos out there of AEG's shooting completely submerged underwater (for a bit.) A little rain shouldn't do anything to it.

Share this post


Link to post
Share on other sites

Iv never played with and AEG in the rain how is this going to effect my gun

Like he said, you'll be fine, just make sure wires aren't exposed.

Share this post


Link to post
Share on other sites

I would remove any clone red dot sights if you run one.  They are known for not having the tightest seals.  If water gets inside the sight it can ruin it.  

Share this post


Link to post
Share on other sites

Sights Flashlights, and anything with an O ring and a cap, somewhat wrap a waterproof clear plastic around the vulnerable areas (Might also consider the lens) and Rubber Band it down.

 

Sandwich plastic bags are commonly used, but not recommended considering they fog if placed over lenses

Share this post


Link to post
Share on other sites
Sign in to follow this  

×
×
  • Create New...