Jump to content
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook. ×
American MilSim
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook.
Sign in to follow this  
caveboy

NFA Items / Gun Trust

Recommended Posts

As I start to dig into real steel rifles I kept running into a road block to acquire a true SBR and suppressor.

 

After talking to my local gun dealer and some research on my own I found the best way, for me since I live in the great state of TEXAS, to obtain NFA items was to acquire a gun trust.

 

On 5/7/2014 at 10:30am I filled out the online forms from http://199trust.com/ and received the gun trust the same day at 4:00pm.

 

It only cost $99 bucks to get the trust done. 

 

The trust comes with all the paper work needed and easy to understand directions. 

 

Great customer service. Fast response and very reasonable on the price.

 

I also have to thank my local gun shop http://www.westforkarmory.com/ for advising me and helping answer any questions I had..

 

Now the hardest part is to decide on which suppressor I want to get first..

 

Caveboy

 

 

Share this post


Link to post
Share on other sites

199trust is who I used as well.  About as fast as it gets.  It costs 199 dollars though, not 99 (something like $220 after taxes).

 

Get an adjustable gas block (I assume you have carbine length DI) and get a YHM Ti Phantom QD.  

Share this post


Link to post
Share on other sites

199trust is who I used as well.  About as fast as it gets.  It costs 199 dollars though, not 99 (something like $220 after taxes).

 

Get an adjustable gas block (I assume you have carbine length DI) and get a YHM Ti Phantom QD.  

According to the site it's $99 now.  YMMV

Share this post


Link to post
Share on other sites

Be sure to get that barrel re-threaded for the suppressor. Often times factory threading is not concentric to the bore. Its not a problem with flash hiders or comps but it could cause a baffle strike on your shiny new can. In the world of NFA its cheap insurance.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×
×
  • Create New...