Jump to content
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook. ×
American MilSim
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook.
SABRE 08

Post Your Plate Carrier Thread!

Recommended Posts

It says that the pictures are not available, why can't I see most of the pics? 

 

Are you at work?  There may be a firewall.  

 

Otherwise, a lot of these are attached from facebook and if the picture is deleted, poof.

Share this post


Link to post
Share on other sites

https://ibb.co/Bc7WQbW

https://ibb.co/ct2T18V

I'm with the Army but when I get out I plan on running a similar setup for Milsim. First things first, unit SOP dictates a bare minimum of what you need to have on your IOTV/Plate Carrier. Depending on your BN/Company you may be able to run your shit however you want. But some units you need your IFAK on a certain side, a canteen on the opposite, camelbak and your magazines on your front. 

My company commander doesnt care as long as you have the minimum requirements.

Quick rundown:

White = For Plugging Holes

Violet/Pink/Magenta = For Preventing Holes

Yellow = For Making Holes

Orange= Miscellaneous

Not pictured: Small Dump Pouch on Riggers Belt

1= IFAK, US Army Issue, contains an Israeli Bandage, NPA, Chest Seal, Eye shield, Red/Green/Blue/White micro light, Gauze, Gauze Pad

2a 2b 2c = CAT TQ in issued TQ pouch, excluding 5c which is stored in an elastic stretch. I make sure to keep a TQ on each side of the PC.

3 = Trauma Shears for shedding a casualties equipment/Uniform

4a, = Side SAPI Plate, Unit dictates I must run side pouches, so I run the UCP sideplate pouches off my IOTV. Blends in with the rug pretty well

4b = Small SAPI Cut Plates. I also run a Qoreperformance ICEPLATE, its a Hardshell camepbak in the shape of a SAPI that you run inbetween your Vest and your skin, and you can freeze it/fill it with hot water and as it melts/cools it provides drinkable water. The best camelbak on the market no doubt. It can provide 4 hours of a frozen water source that keeps you cool. Also frozen water is proven to be a somewhat reliable armor addition depending on the caliber/velocity.

5a, 5b, = Standard Issue OCP Double Magazine Pouches. Dont use the flaps because the elastic on the sides retains the magazines well.

5c = HSGI Admin pouch. The unique thing about this pouch is that it can store an extra magazine/TQ on the bottom of it, and also can store x2 Magazines behind it. I keep MRE Toilet Paper, ASP Zipcuffs, Regular zipties, Chemlites, Maps, and extra batteries in it. On the elastic bottom band I have a single CAT TQ with a Push-Sharpie.

6 = A SOCP Dagger, my utility/fighting knife. Stored with the sheath in the MOLLE webbing.

7 Orange = Gerber Strap Cutter, for shedding seatbelts if in a rolled over vehicle, shedding vests, uniforms, and also opening MREs. Its basically a hook with only the inside of the hook sharpened so you dont have to worry about cutting yourself or your casualty.

7 White = Qore Performance Icevents. The best self-cooling padding out there, period. Can be used as any sort of padding- belts, vests, headsets, helmets, backpacks, anything.

8 = Permanent Marker/Pen. On the internaI admin pouch I keep a 9 line card, and a US ARMY Smart Card.

9 = S Clip NLB Carabiner. For attaching your gloves/sling to. Poor mans single point sling converter. Can also be used to retain a slung weapon if searching detainees/climbing ladders/door breaching.

10 = Ironclad EXO Gloves. Going to be upgrading to MECHANIX M-PACT 3 tans.

Snapchat-2084230044.jpg

20191002_065559.jpg

Share this post


Link to post
Share on other sites

×
×
  • Create New...