Jump to content
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook. ×
American MilSim
AMS Forums set to ARCHIVE MODE (POSTING DISABLED). These forums will be used for historical reference, otherwise you can find the AMS event pages located on Facebook.
TAK

DAT Gunporn thread - Show your Replica

Recommended Posts

Thanks. I'm going to try my best to remove all the paint off the buffer tube this weekend and make it straight silver and I'll probably paint the the outer barrel silver too. I can't find an aftermarket silver outer barrel for the WE in the Carbine length and I'm not sure I wanna swap out the buffer tube with another brand either. Trying to avoid malfunction where possible.

Share this post


Link to post
Share on other sites

heres a look at my new secondary. It started out as a testing of the waters to see if there was a cheap alternative that had the quality of a good sidearm. This is the WE G19 gen4. i must say its quite a beast. I got this little honey badger as a happy medium between a Marsoc kit and a Naval Special Warfare Development Group kit. other applicable kits would be CAG and Navy SEALs. I apologize if the secondaries go someplace else, if so i will gladly move it.

 

12+-+1+%281%29.jpg

 

12+-+1.jpg

Share this post


Link to post
Share on other sites

NmtP2.jpg

 

Started working on doing a Mk.18 Mod 1 build, got the externals...just need the Mk.18.

 

So I mounted all my stuff to the VFC SR-15E3.

 

ACM SpecterDR

TangoDown Vertical Grip

M3 (Element M3x is on the way)

ACM PEQ15

Got an Element Dual Switch on the way

Share this post


Link to post
Share on other sites

I have been thinking of putting a Specter (replica) on my EF 416, how is the eye relief on those? Good looking set up there.

Share this post


Link to post
Share on other sites

heres a look at my new secondary. It started out as a testing of the waters to see if there was a cheap alternative that had the quality of a good sidearm. This is the WE G19 gen4. i must say its quite a beast. I got this little honey badger as a happy medium between a Marsoc kit and a Naval Special Warfare Development Group kit. other applicable kits would be CAG and Navy SEALs. I apologize if the secondaries go someplace else, if so i will gladly move it.

 

*Pictures of awesome glocky things*

 

 

 

 

Where did you acquire that G19? I wouldn't mind getting one since that's what I CC.

 

 

In other news, pic thread:

8104038812_188dd1b4d4_b.jpg

Share this post


Link to post
Share on other sites

Very nice, Raptorkat! I don't think I've many, if any at all, masterkey's on the field. Truely unique!

Share this post


Link to post
Share on other sites

Beta Project Magpul Mag-K
CYMA AKS74U
KWA USP 45

I have a problem covering my stuff in all things Magpul. I also really like putting CYMA AK's thru the ringer, which always take awhile, since they're apparently indestructible. All I ever do to mine is replace the inner barrel and hopup bucking & run em till they break. Once that happens, then start dumping $$ into the internals.

 

img0252sx.jpg

 

img0308px.jpg

 

40038723904492617080219.jpg

Share this post


Link to post
Share on other sites

277955_10151356168819078_559998052_o_zpsc9c8a282.jpg

 

OK! This is my collection!

 

KWA MP7

ICS CXP with some work on it

ICS MK18 with lots of internal work

and Finally

my Polarstar Classic Army G3A3 with rails and PRS stock (there is a lot of other internal work on it)

 

YAY POLARSTAR!

Share this post


Link to post
Share on other sites

This thread has been around for way too long for me not to have put anything up. We'll start with my AK's.

 

img1523f.jpg

My new primary AK. Started out as a CYMA AK47 but after some external changes and full internal upgrades, it's an AK74 now. I went with the full stock because my real steel AK has one as well and the large battery compartment allows me to use almost all types of batteries, especially ones that will last the entire OP. Busted it's cherry at RDGXI.

 

img1521wh.jpg

 

img1519yt.jpg

 

This used to be my primary for the longest time. Started out as a CYMA AK74U boneyard gun. Used to have a full RIS on it, but since my real steel AK is getting an UltiMak gas tube rail I changed this one over as well along with my full size (first pic). This thing has seen countless OPs for about 2yrs without one single break down ever. Despite it's size, after being Rhoped, it reaches every bit of 275ft.

 

img1525os.jpg

 

img1529wn.jpg

 

Got this gun from one of my former team members back when I was in JTAG. Just an ECHO1 CPM and swapped out the black plastic handguards to some real wood ones. This one stays at a lower FPS for use at my local CQB fields.

Share this post


Link to post
Share on other sites

You make me want an AK, Metal.

 

Jazzman, those are some great looking blasters!

 

Toying around with set ups on my MK18. I believe this is what I will be running at End State.

 

8cUGw.jpg

 

-Pup

Share this post


Link to post
Share on other sites

I also just finished my new DMR. Stayed with the M14 platform that I've had at least one of in some variation ever since I got into airsoft in general, let alone MilSim. Stuck with a SOC16 for a base rather than a full size M14.

 

img1536jk.jpg

 

img1538lt.jpg

 

img1531t.jpg

 

This time I decided to stray away from G&G/CA so that I had more (and cheaper) mag options along with finally making my dream of making a M14A1 DMR. The gun started out as an Echo1 SOC16 that I bought used on these forums from Turd. He had already installed a MOSFET, steel gears, Matrix Magnum super high torque motor, full metal tooth swiss cheesed piston, and a modify piston head. By going to the G&P DMR stock, I had to remove the short motor and go to a long type due to the stock requiring the supplied straighter motor housing. It now has an aluminum ported bearing piston head, SHS double o-ring cylinder head, metal bearing spring guide, and SHS aluminum air seal nozzle. I polished the rails that the piston rides on and did some other minor tweaking. With the current stock barrel and an M120 spring, I'm getting about 420fps with no more than 3fps variance. I also made it permanently semi-auto. It is indeed Rhoped and I may install a tightbore later if the stock barrel proves to not be so accurate. If you look at the bottom picture, I put the rifle over some real MultiCam to compare my custom MC tiger stripe paint job that I did. I had to paint it either way because when I got it the dark red with yellow and blue spatter paint job was just too much awesome for me to handle, so it had to go. The rail system is a KA rail that I removed from my old G&G DMR.

Share this post


Link to post
Share on other sites

QKh5poe.png

 

Custom VFC SCAR L:

 

Internal:

Prometheus 6.03 TBB

Prometheus Hopup bucking

Prometheus M120 Spring

Lonex Titan A1

ICS Polycarb Piston

Future Energy Tappet Plate

AOE Corrected

(R-Hop coming soon)

 

External:

EoTech 552 Replica

Magpul MBUS

Magpul MOE Vertical Grip

Madbull Gemtech Suppressor

Paint job coming soon!

Share this post


Link to post
Share on other sites

×
×
  • Create New...