Semi Auto

[Doomshaper 26]

So the rules say that a Rifleman has to shoot in Semi Auto only.

My question is: Ibought one ofthose Kong mosfet chips that allows you to program your gun for semi only etc. Is this allowed?

Also does anyone have any experience with one?

[DCAGrover 136]

As long as the rifle won't go auto. Kong is just a MOSFET.

[CallSignLeda 8]

For rifleman you just have to use semi only but if you play designated marksman your gun cannot be able to go auto (which is where a mosfet can come in).

[RadiumActive27 1]

Does filing down the selector plate count as a lockout for DMRs?

[Dave 781]

Don't over think it.

[kooler 11]

Does filing down the selector plate count as a lockout for DMRs?

yes

[TimmyHorton 72]

or just drill and tap a hole in the gearbox and put in a set screw that will block the plate from going to the rear most position that way it is reversible after the game by just taking away the screw and leaving the tapped hole, it is not noticeable from the out side and doing it this way is quick and simple.

 

just mind your screw length or else your gears will hit it.

[moonball43 33]

Doom, I tried the Burst Wizard (hard wired) in 2 different rifles last year. Both ended up being side lined. The burst wizard has active breaking. In constant heavy semi use you will over heat your motor in no time flat. If you are going to use the burst wizard in semi..... Don't hard wire it.

[Blue1 203]

You can turn the active breaking off on the burst wizard.

[moonball43 33]

That would have been good to know.

[Doomshaper 26]

Doom, I tried the Burst Wizard (hard wired) in 2 different rifles last year. Both ended up being side lined. The burst wizard has active breaking. In constant heavy semi use you will over heat your motor in no time flat. If you are going to use the burst wizard in semi..... Don't hard wire it.

 

I don't know how to hard wire it.

You can turn the active breaking off on the burst wizard.

So if i turn off the active breaking should it be fine or would i be better off just not using it at all?

[moonball43 33]

If it's not hard wired and you are forced to use semi only.... I don't see it serving a purpose. I would pull it out for the day and save any draw on your battery. (It's not much)